WZ Carpentry provides window installation and window replacement in Greenwich, CT. Salt air off Long Island Sound reaches sills, hardware, and exterior trim, and older Greenwich openings rarely match any standard catalog size.
Greenwich window problems are rarely about the glass. Drafts, sticking sashes, and failing paint usually trace back to the sill and the framing under it.
A window company prices the unit. WZ Carpentry prices the opening, because that is where the failure and most of the cost actually sit.
The inspection is free anywhere in Greenwich. Wilmer pulls a casing when needed instead of quoting Greenwich window replacement from the driveway.
Salt-laden air keeps exterior window trim damp in Greenwich, CT. Sills hold moisture, joints separate, and hardware corrodes faster than it would inland.
Fog trapped between panes means a failed seal. The wood underneath often failed earlier and more quietly. One is a glass issue, the other is carpentry.
Window installation in Greenwich has to address both, or a new unit ends up fastened into framing that already gave up.
Window replacement in Greenwich covers removing the old unit, repairing sill and jamb, setting the new window level, and rebuilding trim on both sides.
Window installation in Greenwich, CT covers new openings, where framing, header work, and flashing all come before anything gets ordered.
Residential window services in Greenwich also cover casings, aprons, and stools, which is where most of the visible finish work actually shows.
Call or send the form with the number of openings. Wilmer measures each one on site, since Greenwich openings rarely repeat across a house.
The written scope prices sill repair separately, so you see the wood cost before committing to Greenwich window replacement.
All residential window work in Greenwich is insured, with written proof of coverage available before anything is scheduled.
Window Services in Greenwich
Homeowners searching for window replacement in Greenwich, CT usually describe two symptoms: a draft that never goes away and a sash that no longer moves. Both point at the frame rather than the glass.
Greenwich window services handled by a carpenter mean the sill, the jamb, and the trim on both sides are part of the original scope, not a change order after the unit is already set.
Greenwich sills near the Sound stay damp longer, so rot shows up under the unit before anything is visible on the glass.
Window work can require a permit, especially with openings that change size.
Antique colonials and shoreline homes carry non-standard openings, so units get ordered to measured dimensions rather than nominal sizes.
22 years of residential carpentry in Connecticut, including window replacement and the sill and trim work surrounding it.
Often the units last fine and the wood around them doesn't. Salt air keeps sills and exterior casings damp, so the carpentry fails before the window itself does.
Not automatically. If the sash is solid and the frame is sound, the wood around it is usually what needs the work. That's worth checking before replacing anything.
As many as the schedule allows, one opening at a time so the house is never left open. Wilmer gives you a per-window time along with the price.
Water that has nowhere to go. If the sill pitch or the flashing above is wrong, the same spot stays wet and a new board does the same thing.
Yes, both sides. Interior casings, aprons, and stools are part of the job, and the opening gets left ready to paint rather than ready to patch.
WZ Carpentry also replaces windows nearby. Window services near Greenwich, CT extend to the following areas.
Tell us how many openings and what each one is doing. Wilmer measures every window in Greenwich in person before anything is ordered.
Call Now
Interior and exterior trim, stairs, railings, fascia, and custom woodwork.
Entry, exterior, and interior doors hung square, with jambs and thresholds repaired.
Deck construction, repair, replacement, and restoration, starting at the framing.
